All Noise Control supplies and custom manufacturers a wide variety of cost effective, high performance acoustical products for noise control in commercial, industrial, institutional markets as well as other specific markets like Houses of Worship. All Noise Control has been front-runners in delivering specialized noise control materials solving virtually any noise control issue. Be it improved acoustics for theater, broadcasting and audio or churches or blocking noise in industrial plants, heavy construction sites, outdoor large scale applications and others to many to list. They are sure that with our variety of acoustical materials, in multiple colors, shape and size options tailored to fit your needs.

A & C Mold Company contacted All Noise Control and after discussing their application All Noise Control provided, A & C Mold Company with a solution, that would help them soundproof, by suggesting using the acoustical soundproofing blanket, ANC-AB12 This product has the benefit of both soundproofing and noise barriers. All Noise Control’s ANC-AB12 consists of a non-reinforced 1-lb per square foot loaded vinyl noise barrier sandwiched between two layers of vinyl-coated fiberglass-cloth faced 1” quilted fiberglass sound absorbers.

Curtain panels with grommets across the top, hooked and loop fasteners along the vertical edges Rolls are available in 4’ wide x 25’ long and can be supplied with edges bound or unbound Class A (or1) flammability rated per ASTM E84 Available colors: gray, white, black and tan

The applications typically used includes curtain panels in acoustical curtains enclosures also used to separate walls or divide partitions between noise sources, commonly used to line the perimeter walls of a building, or as a free-hanging noise barrier/sound absorber wall.

Our Client, A & C Mold Company order that product and install the product, the result of the product were amazing, they were very pleased with the results.

All Noise Control welcomes you to visit us at www.allnoisecontrol.com or you can contact us at 561-964-9360 for more information, Thank you!
Once you have had a chance to visit this site, contact All Noise Control. Our consultants are trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. You may find our division websites useful. We have designed it with specific products for specific problems in their respective areas.

Nissan made up of a richly diverse group of people, as reflected in the company’s leadership team and the numerous corporate outreach programs in which they participate in the community. Together, they have what it takes to build cars and trucks with the power to change both the way we view the world and the way we move in it.

All Noise Control

All Noise Control supplies and custom manufacturers a wide variety of cost effective, high performance acoustical products for noise control in commercial, industrial, institutional markets as well as other specific markets like Houses of Worship. All Noise Control has been front-runners in delivering specialized noise control materials solving virtually any noise control issue. Be it improved acoustics for theater, broadcasting and audio or churches or blocking noise in industrial plants, heavy construction sites, outdoor large scale applications and others to many to list. They are sure that with our variety of acoustical materials, in multiple colors, shape and size options tailored to fit your needs.

Challenge:

Nissan Dealership contacted All Noise Control; they need to find a product that reduces sound from transmitting through walls, floors, and ceiling. It has also to lower noise problems within existing spaces. Nissan Dealership felt 100% confident that their decision to use All Noise Control was the right decision.

Goal:

The main goal for All Noise Control was to find the ideal product for Nissan Dealership. That consists with their request, reduces sound from transmitting through walls, floors, and ceiling. It has also to correct noise problems in existing spaces.

Solution:

All Noise Control explain to Nissan Dealership that they had a product that could do the job. The product is the Acoustical Vinyl Sound Barrier. This product has a high-density thin, weighted barrier, constructed of non-reinforced high temperature fused vinyl with no lead filters. Weighs one pound per square foot and is 1/8″ thick. Apply to block transmission of sound through walls, floors, and ceilings. Also effective as a pipe and duct wrap to damper vibrations and reduce noise. Also available in a reinforced version designed to sustain its own vertical weight for suspension
Success:
Our Client, Nissan Dealership order that product and install the product, the result of the product were amazing, they were very pleased with the results. The Acoustical Vinyl Sound Barrier was the ideal product.
Once you have had a chance to visit this site, contact All Noise Control. Our consultants are trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. You may find our division websites useful. We have designed it with specific products for specific problems in their respective areas.

All Noise Control welcomes you to visit us at www.allnoisecontrol.com or you can contact us at 561-964-9360 for more information, Thank you!

Bluegrass Station contacted All Noise Control and after discussing their application All Noise Control provided, Bluegrass Station with a solution, that would help them soundproof, by suggesting using the acoustical, ANC-AB12.

This product has the benefit of both soundproofing and noise barriers. All Noise Control’s ANC-AB12 consists of a non-reinforced 1-lb per square foot loaded vinyl noise barrier sandwiched between two layers of vinyl coated fiberglass-cloth faced 1” quilted fiberglass sound absorbers.

Curtain panels with grommets across the top, hooked and loop fasteners along the vertical edges Rolls are available in 4’ wide x 25’ long and can be supplied with edges bound or unbound Class A (or1) flammability rated per ASTM E84 Available colors: gray, white, black and tan.

The applications typically used includes curtain panels in acoustical curtains enclosures also used to separate walls or divide partitions between noise sources, commonly used to line the perimeter walls of a building, or as a free-hanging noise barrier/sound absorber wall.

Our Client, Bluegrass Station order that product and install the product, the result of the product were amazing; they were very pleased with the results.
All Noise Control welcomes you to visit us at www.allnoisecontrol.com or you can contact us at 561-964-9360 for more information.

Once you have had a chance to visit this site, contact All Noise Control. Our consultants trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. You may find our division websites useful. We have designed it with specific products for specific problems in their respective areas.

Weyerhaeuser Company began more than 100 years ago with 900,000 acres of timberland, three employees, and a small office in Tacoma, Washington. Their company’s namesake, Frederick Weyerhaeuser, and their original investors were forest industry experts who contributed capital and, perhaps more important, their experience, reputations and values to the new business. Forestry expertise and commitment to values has held Weyerhaeuser in good stead for more than a century. Today they own or manage 22 million acres of timberland with offices or operations in 10 countries. They invite you to explore our history, with an eye toward our exciting future.

All Noise Control

All Noise Control supplies and custom manufacturers a wide variety of cost effective, high performance acoustical products for noise control in commercial, industrial, institutional markets as well as other specific markets like Houses of Worship. All Noise Control has been front-runners in delivering specialized noise control materials solving virtually any noise control issue. Be it improved acoustics for theater, broadcasting and audio or churches or blocking noise in industrial plants, heavy construction sites, outdoor large scale applications and others to many to list.
All Noise Control discuss with Weyerhaeuser Company and came to a conclusion with what product would be best. The product that would be best would be the ANC-AB110EXT- R2. This product is a sound absorber and used for an outdoor application. Which means that it is UV resistant, and had a maximum durability.

This product is typically use as modular curtains on long – term construction or just a permanent outdoor application such as enclosing HVAC equipment. This product is two inch thick, vinyl coated polyester faced one-inch quilted fiberglass and one pound per square foot reinforced loaded vinyl barrier. This will help sound absorb.

Weyerhaeuser Company was extremely thrilled with the results of the product. The ANC – AB110 EXT-R2 Sound Curtains, with this product they can now work in peaceful environment.

Once you have had a chance to visit this site, contact All Noise Control. Our consultants trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. You may find our division websites useful. We have created them with specific products for specific problems in their respective areas.

All Noise Control welcomes you to visit our web site at www.allnoiseocntrol.com or to contact our specialist at 561-964-9360.

These ceiling tiles are designed to be dropped into an existing ceiling grid system. When it is necessary to cut the tiles to fit existing openings, follow the following steps:

Measure your ceiling grid opening. Be sure to measure from inside to inside, then deduct 1/8″ from your results. This will allow the tile to slip into the grid with ease.

Lay the tile on a clean and smooth surface and mark off your measurements on the back of the tile. Use a straight edge (preferably metal) as a guide for a sharp razor tool. Cut the tile, a couple of passes maybe required.

Drop the cut tile into your grip system

Usage Diagram:

http://www.allnoisecontrol.com/diagrams/CeilingBarrierTile_Diagram.pdf

Our acoustic fabrics can be wrapped on acoustic board and other panel materials like other fabrics you may find in the acoustic market. However, ours is developed to also uniquely be fitted to any solid wall and still achieve outstanding NRC values.

The clear advantages of ANC acoustic fabric are its simple easy, installation and ability to retrofit in virtually any existing commercial space as well as it is inexpensive. Where speech intelligibility is critical, this fabric is an excellent choice for any conference room, classroom, commercial or office space.

ANC acoustic fabrics offer unmatched fade resistance and will offer lifetime of acoustical benefits.
Call us today at 561-585-4703 for details and ordering information.
Benefits & Features

An outstanding noise absorption material ANC acoustic fabric is:
An Aesthetic Dimensional fabric
Offers Unmatched Fade Resistance
Is Fire/Smoke Retardant
Class A/ASTM E-84
Lightweight: 23 oz./ lin. yd.
Durable, Composed of Fossfibreâ„¢ 100% Solution Dyed Polyester
Backing Made of Fusible Clear Latex

November 29, 2007

All Noise Control
6802 Lake Worth Rd 323
Lake Worth, FL 33467

RE: INSTALLATION OF SOUND CHANNELS-2 ACOUSTICAL FABRIC

The attached installation instructions and guidelines should be thoroughly reviewed before installing this product.

The appearance of the finished installation will depend on several factors. A few that should be mentioned are whether or not the installation instructions were followed; the condition of the wall surface to which the fabric is applied; the type of adhesive that was used and the lighting in the room.

It is very important to follow the installation instructions closely in order to insure a satisfactory appearance of the finished wall.

We hope you find this information helpful. Best Regards,

All Noise Control

________________________________________________________________________________________________________________________________________________

MAINTENANCE AND CLEANING
Structured acoustical wall covering, made with face fibers of Polyester, will stay attractive and serviceable with regular vacuuming. Most spots and stains will disappear when treated with mild detergent or cleaning solvent.

MATERIAL
Carefully inspect all shipments. Check and examine material. We cannot be responsible for any imperfections after goods are cut. Before cutting, be sure the pattern and color and satisfactory. Purchaser assumes all responsibility for goods after cutting. No claims will be allowed for labor. All returns must have prior Return Authorization Number and are subject to a 25% restocking charge. All requests for returns must be made within thirty (30) days of ship date.

WALLS
Walls are to be structurally sound and free of dirt, grease, and markings. All markings which cannot easily be removed should be sealed so that ”bleeding” through the wall covering shall not occur. Although it is not necessary for the installation of wall carpet, sealed walls, especially on newly installed drywall, could facilitate future removal of wall covering and lessen damage to walls.

INSTALLATION
Cut material to desired lengths, allowing for top and bottom trimming. Apply a premixed heavy duty adhesive directly to the wall, allowing it to dry to its maximum stack ability without it being overly dry. (IMPORTANT!!! ADHESIVE IS READY MIXED AND SHOULD BE USED AS IT COMES OUT OF THE CAN. DO NOT MIX WITH WATER AND DO NOT PASTE THE BACK OF THE ALLCOVERING). This material is not factory trimmed. It is necessary for the paperhanger to cut a straight edge. All edges must be butt joined. WALLCARPET SHOU LD BE HUNG STRAIGHT UP…DO NOT
ALTERNATELY REVERSE STRIPS…Apply a second coat of undiluted adhesive to the wall, allowing it to dry to its maximum tack ability without it being overly dry. Be careful not to get adhesive onto the face of the wall covering, as it cannot readily be removed. Should adhesive get onto the face, it is best to allow it to dry and flake it off with a stiff brush. Do not attempt to wash affected areas, as this will only serve to dilute the adhesive and spread it over a wider area Install three strips and inspect all for color, uniformity, and correctness of application. If satisfactory, proceed with work as work proceeds, small areas (3 strips) should be inspected so that there are no more than 3 strips in question at any time. If anything goes wrong, STOP WORK IMMEDIATELY and contact your nearest representative for inspection. All seams shall be vertical and only full widths of material should be applied for the most satisfactory installation. Headers over doors may cause shading. All seams shall be at least 6 inches away from inside or outside comers.

Adhesive should have low water base and dry clear or translucent. Room temperature should remain stable at about 65 degrees F- 85 degrees F and be well ventilated before, during and up to 72 hours of the installation. High humidity will extend curing time and may cause Sound Channels to ruffle. Apply adhesive with a 1/16” v-notched trowel at a 45 degree angle. Allow adhesive to tack up before applying the Sound Channels. Rollout Sound Channels with a 1/4” roller. Trim edges with wall covering back cutter or under cutter to true pattern repeat. You may want to tack a few small nails or staples at the top of the fabric to prevent any sliding.

For best results, it is recommended that a qualified textile installer be employed.

Guide to Cleaning Sound Channels 2 Acoustical Fabrics

1brough installation procedures, or consumer use, fabric may become contaminated and require spot cleaning from time to time. The following information is provided as a guideline for the care and cleaning of acoustical fabric made from Polyester fibers. Because this material is made from synthetic fibers, it cleans very well with virtually no damage to the color or construction itself. Most commercially available Carpet and Upholstery cleaners will do an excellent job removing stains. From time to time, additional cleaning methods may need to be employed to remove stubborn or difficult stains.

General

As with any stain or contamination, the quick response is the best, especially when done in conjunction with the proper cleaner for the type of stain. Important: make sure you have selected the right cleaning agent from the list below before you begin the cleaning process. The categories of stains listed below are based on
1) Stains acquired during OEM manufacture and 2) acquired by consumer/end-user following installation of
Fabric.

OEM Fabrication Incidents: Type o(Stain

Oil
Adhesive (water based) Adhesive (solvent based) Felt Tip Marker (indelible) Ink (ball point indelible) Pencil (graphite lead) Chalk
Paint (latex)
Paint (oil) Stains (latex) Stains (oil)
Tar/Asphalt K-1

Cleaning Agent

High strength detergent detergent
mineral spirits detergent
dry clean
detergent detergent
high strength detergent
Solvents/mineral spirits high strength detergent solvents/mineral spirits
Kerosene/solvents

How to Remove

Soak-blot dry
Scrub-rinse-blot dry soak-blot dry
Scrub-rinse-blot dry
Solvent soak-blot dry scrub-rinse-blot dry scrub-rinse-blot dry scrub-rinse-blot dry soak-blot dry
Scrub-rinse-blot dry
Soak-blot dry soak-blot dry

Note: In many cases listed above, repeated steps may be required to fully extract the contaminant from the material. Use solvent type cleaners in a well-ventilated area.

Note: Always check to see that the cleaner will not cause damage to material or fabric, by testing on a small area out of sight.

Consumer/End User Incidents:
Tvpe o(Stain Cleaning Agent

How to Remove

Mustard Ketchup* Coffee* Chocolate* Tea*
Chewing Gum Oil high strength Grease Tar/Asphalt
Wax
Rust Dirt* Lipstick Nail Polish
Shoe Polish Crayon Vomit* Urine* Blood*
Excrement*

dry clean solvent
high strength detergent high strength detergent detergent
high strength detergent dry clean solvent detergent
High strength detergent/ degreaser
K-1 kerosene/thinner detergent
Rust remover detergent
Dry clean solvent dry clean solvent dry clean solvent
High strength detergent
High strength detergent high strength detergent high strength detergent
High strength detergent

Scrub-soak-blot dry scrub-rinse-blot dry scrub-rinse-blot dry scrub-rinse-blot dry. Scrub-rinse-blot dry scrub-soak-blot dry scrub-soak-blot dry scrub-soak-blot dry scrub-soak-blot dry
Hot iron-on detergent-soaked towel or cloth
Soak-rinse-blot dry scrub-rinse-blot dry soak-blot dry
Soak-blot dry soak-blot dry
Scrub-rinse-blot dry
Scrub-rinse-blot dry-deodorize with vinegar scrub-rinse-blot dry-deodorize with vinegar scrub-rinse-blot dry
Scrub-rinse-blot dry-deodorize with vinegar

Note: In many cases listed above, repeated steps may be required to fully extract contaminant from material. Items listed above with(*) may also be removed through steam extraction method by a professional cleaner or service.

Note: Always check to see that the cleaner used will not cause damage to the material or fabric, by testing on an area out of sight.

Important: The recommendations made above are done in good faith and are based on a history of actual experiences and laboratory evaluations. Acoustics First Corporation does not warrant, either expressed or implied, the effectiveness of the cleaning agents listed and the process for cleaning, described above.

Syncro Corporation is a privately held manufacturing and systems integration company with corporate headquarters located in the North Alabama region just minutes away from Huntsville, Alabama. Huntsville, Alabama has been recognized nationally for its highly skilled worked force and contributions in the fields of research, development, manufacturing, and logistics. The level of skilled workforce and close proximity to Redstone Arsenal, home to the Army Aviation and Missile Command, NASA, and to the second largest research park in the United States offers Syncro customers a distinct advantage. Syncro has expanded its EMS capabilities into various markets including medical, industrial, utilities, transportation, technology, and military markets. Syncro Corporation offers more than 70 years of experience in product research and development, management, and post manufacturing support.

All Noise Control supplies and custom manufacturers a wide variety of cost effective, high performance acoustical products for noise control in commercial, industrial, institutional markets as well as other specific markets like Houses of Worship. All Noise Control has been front-runners in delivering specialized noise control materials solving virtually any noise control issue. Be it improved acoustics for theater, broadcasting and audio or churches or blocking noise in industrial plants, heavy construction sites, outdoor large scale applications and others to many to list. They are sure that with our variety of acoustical materials, in multiple colors, shape and size options tailored to fit your needs.
Syncro Corporation contacted All Noise Control and after discussing their application All Noise Control provided, Syncro Corporation with a solution, that would help them soundproof, by suggesting using the acoustical, ANC-AB12 This product has the benefit of both soundproofing and noise barriers. All Noise Control’s ANC-AB12 consists of a non-reinforced 1-lb per square foot loaded vinyl noise barrier sandwiched between two layers of vinyl-coated fiberglass-cloth faced 1” quilted fiberglass sound absorbers.

Curtain panels with grommets across the top, hooked and loop fasteners along the vertical edges
Rolls are available in 4’ wide x 25’ long and can be supplied with edges bound or unbound
Class A (or1) flammability rated per ASTM E84
Available colors: gray, white, black and tan

The applications typically used includes curtain panels in acoustical curtains enclosures also used to separate walls or divide partitions between noise sources, commonly used to line the perimeter walls of a building, or as a free-hanging noise barrier/sound absorber wall.

Our Client, Syncro Corporation order that product and install the product, the result of the product were amazing, they were very pleased with the results.
All Noise Control welcomes you to visit us at www.allnoisecontrol.com or you can contact us at 561-964-9360 for more information, Thank you!
Once you have had a chance to visit this site, contact All Noise Control. Our consultants are trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. You may find our division websites useful. We have designed it with specific products for specific problems in their respective areas.

The Desktop Sound Masking Unit can uniquely be adjusted to suit a variety of room conditions by adjusting the amplitude and spectra shapes. This adjustment can be in increments of +/- ½ dB. In addition, the system has the adjustment capability to provide the most unobtrusive sound while obtaining the maximum speech privacy that meets ASTM E-1130 standards for speech privacy and sound uniformity. The spectrum shape adjustment ranges from 1 dB at 125 Hz to 20 dB at 8,000 Hz (typical). Range of sound level: 41-86 dBA.

About All Noise Control

All Noise Control supplies and custom manufacturers a wide variety of cost effective, high performance acoustical products for noise control in commercial, industrial, institutional markets as well as other specific markets like Houses of Worship.

All Noise Control has been front-runners in delivering specialized noise control materials solving virtually any noise control issue. Be it improved acoustics for theater, broadcasting and audio or churches or blocking noise in industrial plants, heavy construction sites, outdoor large scale applications and others to many to list.

Once you have had a chance to visit this site, contact All Noise Control. Our consultants trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines.

You may find our division websites useful. They have designed them with specific products for specific problems in their respective areas.

Contact us at 561-964-9360 or visit the webpage at www.allnoisecontrol.com

This product has the benefit of both soundproofing and noise barriers. All Noise Control’s ANC-AB12 consists of a non-reinforced 1-lb psf loaded vinyl noise barrier sandwiched between two layers of vinyl-coated fiberglass-cloth faced 1” quilted fiberglass sound absorbers.

• Curtain panels with grommets across the top, hooked and loop fasteners along the vertical edges
• Rolls are available in 4’ wide x 25’ long and can be supplied with edges bound or unbound
• Class A(or1) flammability rated per ASTM E84
• Available colors: gray, white, black and tan

The applications typically used includes curtain panels in acoustical curtains enclosures also used to separate walls or divide partitions between noise sources, commonly used to line the perimeter walls of a building, or as a free-hanging noise barrier/sound absorber wall.

Idaho National Laboratory placed the order and installed ANC-AB12, which is an acoustic quilted fiberglass absorption blanket. After they installed the product, they were satisfied with the results. However, Idaho National Laboratory experiences a significant drop decibel making that area of the pant more manageable and safer for workers.

Visit our ANC-AB12 Acoustic Wall Panel page to see the wide selection of products.

Once you have had a chance to visit this site, contact All Noise Control. Our consultants trained to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. Call at 561-964-9360 or visit the website at www.allnoisecontrol.com.

All Noise Control supplies and custom manufacturers a wide variety of cost effective, high performance acoustical products for noise control in commercial, industrial, institutional markets as well as other specific markets like Houses of Worship. All Noise Control has been front-runners in delivering specialized noise control materials solving virtually any noise control issue. Be it improved acoustics for theater, broadcasting and audio or churches or blocking noise in industrial plants, heavy construction sites, outdoor large scale applications and others to many to list.
All Noise Control discuss with American Fence Company and came to a conclusion with what product would be best. The product that would be best would be the ANC-AB110EXT-R. This product is a sound absorber and used for an outdoor application. Which means that it is UV resistant, and had a maximum durability.

This product is typically use as modular curtains on long – term construction or just a permanent outdoor application such as enclosing HVAC equipment. This product is one inch thick, vinyl coated polyester faced one-inch quilted fiberglass and one pound per square foot reinforced loaded vinyl barrier. This will help sound absorb.

American Fence Company was extremely thrilled with the results of the product. The ANC–AB110 EXT-R Sound Curtains, with this product they can now work in peaceful environment.

Once you have had a chance to visit this site, contact All Noise Control. Our consultants are train to answer any question, construct a solution to your noise pollution problem, and help you figure out the appropriate products, quantities, and installation guidelines. You may find our division websites useful. We have created them with specific products for specific problems in their respective areas.

All Noise Control welcomes you to visit our web site at www.allnoiseocntrol.com or to contact our specialist at 561-964-9360.